• Home
  • Hardware
  • Won’t fit in the case: PNY introduces 4.5-slot RTX 4090 and RTX 4070 graphics cards

Won’t fit in the case: PNY introduces 4.5-slot RTX 4090 and RTX 4070 graphics cards

PNY showcased some of the best graphics cards at the Computex 2023 fair. Alongside its end consumer products, the firm also showcased some workstation boards, including the RTX 6000 Ada Generation and RTX 4000 SFF. But besides all...
 Won’t fit in the case: PNY introduces 4.5-slot RTX 4090 and RTX 4070 graphics cards
READING NOW Won’t fit in the case: PNY introduces 4.5-slot RTX 4090 and RTX 4070 graphics cards
PNY showcased some of the best graphics cards at the Computex 2023 fair. Alongside its end consumer products, the firm also showcased some workstation boards, including the RTX 6000 Ada Generation and RTX 4000 SFF. But next to all, two cards stood out: the 4.5-slot RTX 4090 and the blower fan RTX 4070.

PNY GeForce RTX 4090 Verto

It has partnered with Cooler Master to realize the GeForce RTX 4090 Verto card that PNY has showcased. Therefore, the cooling solution of the card comes from the Cooler Master wing. The highlight of the card is that it has a 4.5-slot size. Therefore, we can say that the GeForce RTX 4090 Verto will occupy almost all the PCI slots in a typical mATX chassis. The dimensions of the GeForce RTX 4090 Verto are 310 x 142 x 89 mm.

On the other hand, what is known about the GeForce RTX 4090 Verto is limited. Of course, the basic features of the card are the same as the standard RTX 4090, but the important thing was what the clock speeds were with this huge cooling solution. Unfortunately, the most important information is not available. However, the card uses a dual dual-fan cooling solution. Equipped with Cooler Master’s Mobius 120P ARGB 30th Anniversary Edition 120mm fan, the board is powered by a 16-pin (12VHPWR) power connector and offers three DisplayPort 1.4a outputs along with an HDMI 2.1 port.

PNY GeForce RTX 4070 Blower Edition

In the GeForce RTX 40 series, there are not many blower type graphics cards on the market. So far we are only aware of two Ada Lovelace models with only a few blower designs. On the other hand, although Leadtek’s WinFast RTX 4070 AI Blower 12G solution is available, it is not common globally. Therefore, PNY has an excellent opportunity for success with the GeForce RTX 4070 Blower Edition.

The GeForce RTX 4070 Blower Edition comes in a standard dual-slot format with dimensions of 278.4 x 119.4 x 40mm. GeForce RTX 4070 Blower Edition uses an 82mm fan for active cooling. The purpose of this fan is to dissipate the generated heat from the back of the card. PNY didn’t share clock speeds for this card, either. However, we are familiar with the fact that the clock speeds are not aggressively high on blower type cards.

Comments
Leave a Comment

Details
233 read
okunma15632
0 comments