The sudden explosion of the brake while driving is the horrific dream of everyone. However, you don’t have to be afraid if you have the maintenance of your car.

Again, let’s explain step by step what you should do in a car vacated in the brake pedal.

Let’s start from the foundation, why doesn’t the brake hold?

As for all other parts of the cars, brakes have an obvious life. The brake hoses are worn out and the brake hydraulic oil empties. Brake ejaculation occurs due to the hydraulic oil that causes pressure.

In order to take this precaution, you should have the maintenance of your vehicle systematically and take it directly to the audit when you sensor a problem.

Let’s come to our real issue. What will we do if he doesn’t?

The first thing you need to do is burn the quadruple lamps and pull your feet off the gas to report that you are in emergency. If you press the gas in a car that does not hold the brake, the situation may go worse.

Then, if your speed fixer is open, it will be appropriate to close it. Another step is to lower gear.

After lowering the gear, press the brake pedal hardly to test whether there is enough hydraulic oil to cause a little pressure. If this doesn’t work, a panacea is pulling the hand brake.

However, you should not pull the hand brake to the end. After pulling 2 teeth, the car will slow down. If you are still not slow, you can pull one more teeth.

There are other procedures you can apply.

If you have such a possibility, you can direct your car to a steep slope.

In addition, you can cut the ignition 1 medicine and turn off the engine (do not do it at high speed).

Finally, what is recommended is to create air resistance in the vehicle. By opening all the windows of your car and creating air circulation inside, you can disrupt aerodynamics and slow down a little bit.

More content about cars: