Google has gathered the anger of users many times due to the Android software it has released in the past years. But all of the problems were overcome in time. However, this time, it faced a hardware problem on Pixel 6 devices. Here are the details…
Google Pixel 6 series has a fingerprint calibration problem
Google Pixel 6 users, who shared their problems via Reddit and Google Support, said that the fingerprint sensor either did not work at all or was problematic after replacing their screens. says. Even users who have screen replaced in their own services such as Google’s UBreakIfix report the same problem.
The issue arose because both users trying to re-identify their finger to the under-display fingerprint reader and users with already registered fingerprints received the error “Unique calibration software not found for this device” .
This problem is thought to be caused by the software Google provides to the services. Because after the repaired screen, the fingerprint sensor needs to be defined and calibrated to the device again. At this point, software shared by the company is used. Therefore, it is said that the problem is actually caused by the calibration software.
Google was dealing with a similar problem last October. Due to various comments from users about the slowness of fingerprints and the similar calibration process after repair, it surpassed them with an update it released. Therefore, it is thought that he can fix the problem he is currently experiencing with an update that he will give again.
Pixel 6 Pro features
| Processor: | Google Tensor |
| RAM: | 12GB |
| Storage: | 128/256/512GB |
| Display: | 6.7″ QHD+ (1440×3120, 19.5:9) LTPO OLED, 120Hz, Gorilla Glass |
| Battery: | 5003 mAh, 30W (USB PD PPS) wired, up to 23W wireless charging |
| Rear camera: | 50 Megapixel f/1.85 main camera, 12MP f/2.2 ultra-wide, 48 Megapixels camera |
| Front camera: | 11.1 Megapixels |
| Connection: | 5G, Wi-Fi 6E (802.11ax), Bluetooth 5.2, NFC |
| Other features: | IP68, under-screen finger k sensor, USB Type-C 3.1 Gen 1, Dual-SIM |
| Dimensions: | 163.9 x 75.9 x 8.9mm, 210g |
| Colors: | Yellow, White, Black |
What do you think about this subject? Don’t forget to share your feedback with us on the SDN Forum or in the comments!
40464
