Falling the phone into the pool, sea or toilet has happened to most of us at least once. When the phone we bought for a high price falls into water or salt water, we start to think about whether it will be opened again, whether it will be repaired or if it will be repaired, the price (how much is it?) than the information inside. Liquid contact phone repair is possible, but there are things you can do to save it instead of repairing it right away; you should at least try. In this case, you can increase your chances by doing the do’s and don’ts.
What to do if the phone is dropped in water?
- Turn it off even if it’s running.
- Take apart the water damaged phone.
- Try drying the outside.
- Remove water droplets with a vacuum cleaner.
- Leave it in an airy, sunny place.
- Keep it in the rice.
We know it’s hard to react right away after such a devastating event, but you have to come out of the shock. The longer your phone stays underwater, the lower its chances of survival. Therefore, even if it has fallen into the toilet, you should immediately dip your hand in it. Make sure that when the phone is out of the water, it is turned off and stays that way. Even if it is running it is fine to turn it off, still obviously turn it off. Turning off the phone ensures that the electronic circuits are active so that water does not reach and damage important parts of the phone. Water reaching working components is more likely to cause permanent damage.
Disassembling the phone means removing all removable parts. If the back cover is removable, remove it. Similarly try removing the battery, SIM card and microSD card if possible. Spread it all out on a paper towel. Most phones these days don’t have removable covers, but do your best. If you’re a techie, if you know the phone inside and out, feel free to void the warranty, go ahead and take the whole phone apart. This can help you dry each piece faster. Just be careful, it can do more harm than good if you don’t know what you’re doing.
First, try to get rid of all the excess water on the outside of your phone. Use a cloth or paper towel to dry everything as much as possible. Be careful not to mess with the phone too much. Gently dry without moving too much. Don’t let any more water get inside the phone.
Of course there will be areas that paper towels can’t reach. The vacuum cleaner can absorb water drops from the phone without much risk. It is useful to do this without moving the phone too much.
The hardest part is now; you will not be using the phone for a while. Waiting is not easy, but necessary. You can leave your phone on the table or leave it in a drawer. You can also leave it on the windowsill or where the air conditioner hits.
Another common practice is to soak the phone in rice and leave it for two or three days. Why rice? Of course, not only because it is readily available in most households, but as you know, rice is dry and very good at absorbing moisture from the air; this allows the phone to dry better in its environment.
You’ve done everything you can, and it’s been a few days. It’s time to see if all your efforts are paying off. Pick up the phone where you left off and put the parts together. Plug the phone in and try to turn it on. If it worked, you did it! Still, be on the lookout for any strange occurrences for a few days. Also test all components. Make a call, turn on music and test the speakers, etc. to see if the microphone and headset are working.
If the phone is not working then it’s time to take it to a professional and see if it can be recovered. Cell phone insurance usually covers damage due to liquid contact, but phone manufacturers consider it user error and exclude it from warranty; Even if the warranty continues, the problem is solved by providing paid parts replacement. The cost of repairing the phone that has fallen out of water varies from manufacturer to manufacturer. Even the manufacturer’s own authorized service provider can give separate prices. So giving a price can be misleading.
What should not be done when the phone is dropped in water?
- Do not pick up the phone. The interaction of electrical parts with water is not good when the device is operating.
- For the same reason, do not plug it into the charger.
- Do not press any key. This may allow more water to enter.
- It’s best to deal with the phone as little as possible.
- Do not shake or blow into the device. In particular, do not use a dryer.
- Do not apply any heat to the phone. Remember, excessive heat can also damage the phone.
- Do not move the phone too much. You do not want the water to move inside the phone.
24959
