Especially in the last 15 minutes, washing machines pretending to be in the illusion of a different time flowing in a different layer of the multiverse are frustrating for all of us.
“Well, it’s probably over now.” While you wait with the laundry basket and clothespins in your hand, time is almost bent for the washing machine and you can’t get enough of washing it. So what could be the reason for this situation?
Why does the time written on your washing machine get longer?
Washing machines that make you think they have the same software as the remaining time calculation used during file transfer on your computer actually have some reasons for doing this.
Even though some of these reasons are things that can be corrected with your intervention, the same is not always the case. Let’s take a look at why your washing machines are not finished on time.
Fixed program times may be extended if the process is not finished.
The fixed program duration for the spin process may vary. For example, if the spin time of your machine is programmed to 10 minutes and the spin is not finished, 10 minutes will be written on the screen.
Also, if there is too much water or foam in your machine before spinning, this amount should be reduced before it starts to spin. For this reason, it continues until the amount of foam or water in the machine decreases. You can avoid this problem a little bit by adding less detergent to plush, fluffy or woolen clothes.
Too much detergent may cause changes in the planned time.
Although the amount of detergent required for cleaning the laundry to be washed is written on the back of the detergent boxes, this ratio is usually half for powder detergents and as much as a lid for liquid detergents.
If you put more than the recommended amount of detergent in the chamber, the machine will continue to wash until all detergent is removed, and this will cause changes in the planned time.
If the ideal water density, pressure or temperature cannot be achieved, the washing time may increase.
Since washing machines are planned according to the ideal, their programs may change if they encounter the opposite situation. For example, if the water pressure or electrical voltage in your home is low, this will also affect the machine.
If the water needed by the machine comes from the faucet for a very long time, this will cause a longer time. The same is true for not providing the ideal water density and temperature. If these problems are caused by your home, you can prevent them by calling the service.
If the laundry in the drum has different materials, it can waste time in the machine.
If there are different materials (eg silk and jeans) in the machine, your machine will try to balance the load and redistribute the laundry.
In addition to wasting time during this process, extra water is spent. If you pay attention that the materials are not too different from each other while washing your laundry, the displayed time may be more consistent.
- Sources: Reviewed, Mental Floss
21760
