Even though we have a new habit of watching over the internet instead of traditional television systems, most of the users still watch television over the central satellite system or dish antenna. ‘Tuner output overloaded.’ The error warning is often frightening because the phrase overload brings to mind an electrical problem.
‘Tuner output is overloaded’ on all televisions watched Vestel, Regal, Seg, Philips or Tivibu. error warning may appear, but this is not a brand specific problem. The cause of this problem may be in the LNB unit, the tuner output, the cable itself or the central exchange. If you can’t fix it yourself, it would be best to call a technical service. Point to ‘Tuner output overloaded.’ Let’s see what it means, how to fix it in all details.
How to fix ‘Tuner Output Overloaded’ error?
First of all, what is tuner input and tuner output?
In old or new televisions, the points where the broadcast from the central satellite system or dish antenna is connected to the device, that is, the satellite connection ports are called tuners. The word tuner input is not used much, these points are generally called tuner outputs.
So ‘Tuner output overloaded.’ what it means?
Generally, we see ‘Tuner output overloaded, pull out the TV plug from the socket!’ This error warning is a warning message that appears on televisions due to an error in the central satellite system or dish antenna connection. You may come across sentences like:
- Tuner input failed.
- Tuner output overloaded.
- No tuner input.
- Lnb output overloaded.
- A short circuit occurred at the Lnb output.
- Unplug your television.
‘Tuner output overloaded.’ What causes the error?
‘Tuner output overloaded.’ Since the error warning mentions an overload and recommends you to unplug your television, many people think that it is an electrical problem, but this error is caused by the central satellite system or satellite dish connected to your television.
This type of broadcast comes from the satellite to your dish, is carried to your television via cables. There may be some transmission devices or LNB-like units in between. This is why ‘Tuner output is overloaded.’ When you encounter an error warning, you should suspect that there is a problem in the process from the dish to your home.
‘Tuner output overloaded.’ How to fix the error?
Method #1: Check the tuner output:
‘Tuner output overloaded.’ If you are getting an error warning, the first place you should check is the tuner output points of the television. As these points wear out over time, they may loosen or rust. Try to clean and fix the tuner output. If there is, you can see if the problem is with the tuner output by connecting the connecting cable to a different output or TV.
Method #2: Check the cable connecting to the tuner output:
If there doesn’t seem to be any problem with your TV’s tuner output, our next suspect is the connection cable. Especially due to the connection angle, there may be breaks or breaks in the cables that are constantly on the same slope. In fact, these ruptures and breaks can occur anywhere in the cable.
All you have to do at this point is to check the entire cable and see if there are any visible dents or tears. You can replace this cable with a new one, if any, or cover the torn parts with electrical tape. It’s actually best to cut the wire and reconnect it securely, but don’t risk it if you haven’t done this before.
Method #3: Check the incoming port to your home if available:
Before you go up to the roof and check the dish and its connections, you need to look at an intermediate port. In some buildings, the cable from the central satellite system is connected to a device and carried through the wall to your home without piercing your walls. Check if there is a problem with the connection ports or cables of this device. Secure the ports and connect a new cable if applicable.
Method #4: Check the wire coming from the dish to your house:
The broadcast from the central satellite system or your own dish antenna is carried to your home with cables of varying lengths depending on how many floors your building has. These may hang from the apartment space or some walls may be punctured and passed through. Something may have happened to your cable on this long journey.
Don’t put yourself at risk, as such cables are generally only within the reach of experts. Check the cables at visible points, if any, or find out if any work has been done in the apartment that day that will affect this cable. Depending on the situation, the cable can be repaired or replaced.
Method #5: Check the LNB unit in the dish:
In the central satellite system or your dish antenna, there is a device called the LNB unit, which converts the signal from the satellite and transmits it to you via cable. This device is similar to the tuner output. The LNB unit may be loose, damaged or broken due to many different reasons, resulting in ‘Tuner output overloaded.’ may have caused the error.
Method #6: Check your TV:
‘Tuner output overloaded.’ When you get an error, the things to suspect are the tuner output, connecting cables and LNB unit, but this may not always be the case. Sometimes, this and similar error warnings may appear due to a malfunction in the television.
‘Tuner output overloaded.’ To check if the error warning is caused by a television malfunction, turn off the TV, unplug the satellite cable and turn on the TV. If it continues to warn even though no cable is connected to the tuner output, there is a malfunction in the TV.
The error message on the TVs we use with satellite connection is ‘Tuner output is overloaded.’ We talked about the solution methods that you can apply by answering the questions such as what it means and how to fix it. If you are experiencing such a problem and are not experienced in connection work, do not risk yourself and do not forget to call the technical service of your broadcast provider.
8808
